Liquid or gaseous fuel boiler

1. Introduction to Oil and Gas Fired Boilers.

- FO/DO oil-fired boilers and LPG/CNG gas-fired boilers are commonly used in areas with strict environmental requirements or limited installation space.
- Oil and gas fired boilers with a capacity above 15 t/h are of the bi-drum water-tube type, with separate radiant and convection heating surfaces.
- Oil and gas fired boilers with a capacity below 15 t/h are of the fire-tube (shell) type with a furnace tube. Fire-tube boilers are typically of a 3-pass, wet-back design.

2. Technical Specifications:

- Calculation & design: In accordance with TCVN and ASME standards
- Manufacturing procedures: In accordance with TCVN and ASME standards
- Steam capacity: from 100 to 50,000 kg/h
- Design pressure: from 10 to 50 bar 
- Steam conditions: Saturated or superheated steam
- Fuel: Diesel oil (DO), fuel oil (FO), liquefied petroleum gas (LPG), compressed natural gas / natural gas (CNG/NG), biogas
- Boiler thermal efficiency: 91%

3. Advantages of Oil and Gas Fired Boilers:

- Fully automated fuel, combustion air and feedwater supply, making operation easy and simple with minimal operator effort.
- Liquid and gaseous fuels produce no ash or slag, so no dust or slag handling is required and the working environment stays clean.
- The most compact equipment compared to solid fuel boilers, saving a great deal of installation space. It can also be installed in basements or on upper floors.

If you are interested in a boiler, please contact Enthalpy for the most suitable and safest solution with the best investment and operating costs.

1. Type of boiler: Fire tube boiler, for boilers with a capacity of less than 15 tons of steam / hour and type of 2, for boilers with a capacity of over 15 tons of steam / hour.

2. Fuel used: DO, FO, LPG, CNG, BIO GAS

3. Power use: 3 phase 380V, 50Hz

4. Working mode: Two modes are available: Automatic - Manual in fuel, air, water supply continuously or according to level.

6. Manufacturing standard: TCVN 7704 - 2007; TCVN 6413 - 1998; TCVN 8366 - 2010; or according to ASME standard, ...

7. Environmental standards: The noise is less than 85dB, 1m away from the furnace; The exhaust gas is in accordance with QCVN 19: 2009 / BTNMT standard.

8. Main technical data sheet: